UL剛性防火罩

1.1 These requirements describe a test method measuring the resistance of protective materials to rapid-temperature-rise fires.1.1 本文規定了一個量測防護材料在快速升溫火環境下耐火性能的實驗方法.1.2 The test method covers a full-scale fire exposure, intended to evaluate the thermalresistance of protective material applied to structural members and the ability of the protective material to withstand the fire exposure.1.2 實驗方法包含一個全尺寸火災實驗,用來評價應用于結構構件的防護材料的耐熱性能和耐火性能.1.3 The test method also covers a small-scale fire exposure, intended to evaluate the ability of protective materials to withstand a variety of environmental conditions anticipated.1.3實驗方法同時也包含了一個小比例火災實驗,用來評價防護材料在多種預期環境下的耐受能力.2 General2.總則2.1 Units of measurement2.1計量單位2.1.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory or approximate information.2.1.1 未加括弧的數值,加注括弧的為解釋值或近似值.2.2 Undated references2.2沒有標注日期的內容2.2.1 Any undated reference to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard.2.2.1 在本標準中出現的任何沒有標注日期的準則或規范都可認為是參照新版本的準則或規范。閥門制造廠應提供閥門破壞扭矩，閥軸的強度應至少按執行機構扭矩的1.15倍定。    緊急切斷閥的全行程關斷時間不應超過1s/英寸閥門通徑（如：DN = 6”的閥門，關斷時間≤6s）。緊急切斷閥的全行程打開時間應符合安全和工藝操作要求。氣動執行機構應配有與閥軸直接相連的閥位指示器。閥的開、關位置應采用文字明確標識。執行機構與閥體的連接應符合ISO 5211標準或制造廠標準。緊急切斷閥的執行機構不應設置行程機械限位裝置。執行機構的電子/電氣部分的防爆等級不應低于安裝場所的防爆等級1.1 These requirements describe a test method measuring the resistance of protective materials to rapid-temperature-rise fires.柔性防火罩是工廠管理中一種有效保護設備的措施，它能將煉油廠、石油平臺、石油化工、熱電站、電器、造船廠和***等場所因火災而產生的危害與損失降至低�；�于特定要求，整個防火罩需確保其在不同時期能抵抗1400℃的溫度。操作按鈕、控制面板、指示器和自動化裝置可以建立快捷。4.6.9  用于緊急切斷閥的電磁閥應符合下列規定：a)  電磁閥應選用直接作用式、至少5.5毫米流通孔徑、316不銹鋼閥體；3.2 實驗爐燃燒控制應滿足:在燃燒時間小于或等于60分鐘時:實驗爐時間溫度曲線下面積