一、設備用途:The application
本設備是為變壓器行業大型絕緣紙筒熱壓粘合而設計,是能對卷圓后的絕緣紙筒在一定的壓力和溫度條件下進行熱壓粘合成型的專項使用加工設備。
It is designed especially for bonding the large cylinder of insulation pressboard in the field of transformer, i.e. the hot sticking on the juncture of the insulation pressboard rolled into cylinder under certain pressure and temperature conditions.
二、主要技術參數 The main technical parameters
1、粘接紙板厚度: The pressboard’s thickness 1.5—6mm
2、熱粘紙筒非常大長度: The Max. Length of cylinder to stick hotly 3200mm
3、粘合接口非常大寬度: The Max. width of overlapping part: 140mm
4、熱粘紙筒直徑范圍: The range of Dia. for cylinder to stick hotly Φ400—Φ3000mm
5. 系統壓力: The system pressure8MPa
6、加熱方式:電加熱,工件粘合溫度70co—110c°可調
The heating method: Electrical heating, and the bonding temperature 70co—110c°,adjustable.
三、主要機構性能 The performance of the main structure
1、本專項使用機床農業生產體系械部分(機座、壓梁)、液壓系統、電氣控制、加熱等四大部分組成。機座、壓梁采用鋼板焊接并經過振動時效處理,液壓站、液壓缸采用國內優異產品。
This machine has four major components such as mechanical part (pedestal and beam), hydraulic system, electrical cool and heating system. The pedestal and the beam is made by steel plates welded and treated by VSR. And the hydraulic and the hydraulic cylinders are selected Chinese products with high-quality.
2.液壓缸采用上頂式,液壓缸的數量要保證壓梁、模具有足夠的強度和剛度,不能有用眼發現明顯的變形,液壓系統不準滲漏油。
The cylinders are upward and their number should guarantee the beam and mold to have enough strength and stiffness. The visual deformation and leaking oil are not permitted.
3、機床具有溫度、壓力、時間系數的設定及調控功能。
This machine has the setting of temperature, pressure and time coefficient as well as the function of cool and regulating.
4、機床帶有圓筒支撐架。
The machine has the cylindrical support frame.
相關推薦