金黃染色添加劑

JB-C03金黃染色添加劑

u  產品特性

1.無需通電，直接浸泡即可與黃金相似的色澤.生產成本較之電解著金色低廉。

2.顏色具優良的耐磨、耐蝕及耐候性；耐光牢度大于8級。

3.適用于建筑鋁型材染金色.

u  開槽參數

JB-C03：   15～25g/L

u  控制參數

JB-C03 ：15～20 g/L   溫  度 ：40～50℃

PH值  ： 4.8～5.1     時間   ：  1～15min                        

u  維護和管理

1.每天檢測槽液中JB-C03濃度并根據分析結果及時補加調整；處理100m2約消耗JB-C03：0.8～1.2Kg。

2.正常生產時PH值呈上升趨勢，每天需檢測一次PH值，并用草酸調整至工藝范圍內；如PH值偏低則說明帶入酸水過多，需控制染色前水洗PH值≥4.5。

3.不生產時須加蓋槽液以防污染；并把PH值下調至4.5且每班檢測一次PH值，以防PH值過高（≥5.5）導致有效成分分解。

4.長期生產槽液或多或少會有沉淀物產生，要定期過濾或倒槽清理沉淀物。

u  包裝、貯存及保質期

25kg紙箱裝；避光、避堿、輕放、密封置干燥，陰涼處，防止泄漏。室溫存放1年。

 

 

JB-C03  Golden Dying Additive

u  Product Features

1.Directly immerse work piece into bath without electrolysis to achieve good results, lower cost.

2.Excellent wear and corrosion resistance, light resistance greater than eight.

3.Suitable for construction profiles.

u  Tank set up parameters

JB-C03：   15～25g/L

u  Coolling parameters

JB-C03 ：15～20 g/L   Temperature ：40～50℃

PH value  ： 4.8～5.1     Time  ：  1～15min                        

u  Maintenance and cool

1.Analyse the bath solution and add to adjust bath condition. Consumption of JB-C03 is 0.8 to 1.2kg per 100m2 of aluminum surface treated.

2.PH value will increase during production hence daily inspection is essential and can adjust by adding oxalic acid. The PH value of rinsing water before coloring should be coolled at≥ 4.5 to prevent dragged over water affecting PH value of dying bath.   

3.Bath should covered if not running production and reduce PH value to 4.5. Daily inspection required and if PH value increased to ≥ 5.5 will lead to decomposition of active ingredients.

4 White precipitation will occur after some time and should be removed.

 

u  Packing and Storage

25kg carton pack；Protect form heating, avoid alkali, keep sealed in a dry, cool place and  prevent   leakage. The product shelve life is 1 year under room temperature.